Hair straightener is ideal for hard-to-reach places such as collars and small folds. Just grasp the desired area ironing, set the average temperature and wait a few seconds. Check that there are no hairs or sticky styling products on the iron: they can damage clothes. Do not use on delicate fabrics.
Choose a flat iron with the “correct” plate width
How attractive your styling will look like depends largely on the chosen ironing. Namely - from the width of its plates. Here a simple rule applies: the longer and thicker the strands, the wider the working surface of the device should be.
For styling short hairstyles, an iron with narrow plates - 1.5-2 cm is ideal. With a device with a wider working surface, it will be inconvenient to grab the strands for straightening or curling them. Medium length hair is conveniently styled with an iron with a plate width of up to 3 cm. With it, you will create a hairstyle of any complexity - starting with perfectly smooth hair and ending with small curls. For long, thick curls, it is better to choose a “massive” iron with a plate width of more than 3.5 cm. Only this one will cope with recalcitrant hair.
But even for styling long strands may be useful narrow iron. It is convenient for them to lay bangs or make small curls on separate strands.
Use a corrugation nozzle for stylish styling.
"Corrugated" styling back in fashion. They do just ironing with a special nozzle. Create the effect of the corrugation can be all over the hair. So the hairstyle will look the most voluminous - an excellent choice for owners of thin, thin strands. Another stylish option to create a "corrugated" styling is to process only the top layer of curls (all or individual strands). They can be left flowing or pick up in her hair.
If you want to experiment with styling, it is better to purchase a multifunctional thermal shoe with a whole set of nozzles. He will definitely not be idle.
Control the degree of heating of the working plates ironing
Frequent use of the ironing - the risk to weaken the hair, making them dry, brittle and dull. But if you do not neglect the precautionary measures, many problems can be avoided.
An important rule is that the heating temperature of the working plates should not exceed 200 ° C. This applies to thick, hard curls that are difficult to style. If the hair is severely damaged and split at the ends, then it is undesirable to heat the iron more than 120-150 ° C.
You can control the temperature level only if you start styling with a more “advanced” iron. It is desirable that he had the function of self-adjustment of thermal modes. Such devices always have an electronic display.
Create beautiful basal volume on the hair
Put aside the hair dryer and the round comb, with which you usually give your hair a basal volume. It is much easier and faster to do it with the iron.
Straighten curls in the usual way, pre-dividing them into separate strands. Just pull the hair with an iron from the roots not down, as you used to do it, but up, lifting the strand. This is the key to lush hair! The technique works well even in the case of thick, long hair.
Use styling powder
If you often use the iron to create a basal volume, styling powder is very useful. It does not weigh down the strands, while making her hair beautiful and fluffy. Mousses and foams will not give such an effect, since they can glue the hairs, only depriving the styling of the volume.
Spread a little dry powder on the strands in the root area, and then iron them upwards from the roots to the ends.
Use a comb at the same time as the iron.
To straighten long hair with an iron sometimes it is necessary to process each strand of the device with hot plates several times. Make it easy for yourself - in parallel, use a massage comb.
How should comb the curls. So they are much faster straightened under the influence of heat. As usual, divide the entire shock of hair into separate strands. And then process each ironing, leading the brush in front of them in curls. So the hair will be perfectly smooth.
Create a slight bend at the ends of the hair.
Perfectly straightened hair ends sometimes spoil the look of a diligently made hairstyle. For example, in wet weather, they lose texture, hang down lifelessly, hiding the entire amount of styling.
To avoid this, practice a simple trick. With the same ironing comb or hairbrush, after straightening, give the tips of the strands a slight bend in the inner side. So the hair will beautifully frame your face, which will make any styling visually more voluminous.
To curl long hair, first braid them
Beautiful curl long hair with soft, large waves can be using ironing. There is one effective, fast way that is useful for those who do not have time to do complex styling.
Comb the curls, put on them a little light mousse. Then braid the braid. Make sure that it does not turn out too tight. Now slowly walk along the spit from the beginning to the end of the heated plates ironing. On thick strands, this can be done several times so that the waves should “grab” properly. ” Unravel the braid and evaluate the result - soft, bulk waves. On hair curled in this way any styling will look beautiful.
Allow the curls to "cool" after thermosetting
If, after using the ironing, you are going to put your hair together in a hairstyle, let it be a regular tail, first let the strands cool. This is necessary to consolidate the effect of thermal styling. Curls for a long time to keep the form that you gave them ironing. Nor does it matter how long your hair is.
I cleaned the intestines and lost 11 kg in a month - a super scrub for the intestines!
I decided to help a large family. This was the first and last time.
He became a world champion and built a settlement for poor families for prize money.
As without a hunger strike and without torment say goodbye to 5 kg.
Home "Nutella" for a few moments. I had no idea that my nutella
"Pants are not too tight?": Vladimir Presnyakov showed a funny video with a 3-year-old son
20 photos of the most unusual friendship of the animal world!
"Ring for beggar woman." Story
A man hears two strangers whisper in an airplane — then quickly
Drainage wonder drink for strong weight loss. You will lose extra weight each
I am very grateful for the wonderful recipe: now I do not run to the toilet in the middle of the night!
This mixture of 2 components can ruin pharmacological campaigns! Learn n
Ani Lorak performed the hit of Whitney Houston in the Golden Hall of Austria. Real furor!
Plate material: from what, what our ... forceps are made of
The first thing we pay attention to is what material was used for the plates. It is they who influence the hair structure and they are responsible for the “burned” tips and not only. It is required to find out which iron does not spoil the hair or causes minimal and reparable harm. Plate material is the most important factor:
1. Metal - budget and ruthless to the hair option. Although models with metal plates and the most affordable, but adversely affect every hair. Heating is not the same throughout the canvas (therefore, some areas are overdried) and cools for a long time. Every day is definitely not useful, and it is better not to use it in principle.
2. Pottery is also not expensive, but already much more chap-friendly material for the plates. Take a closer look at the Gorenje HS110PR model. Gentle effect, uniform heating, maintaining the optimum temperature, soft glide and shine. But even in this case, it was not without drawback - cosmetics often stick to such plates. After each use - wipe the cloth with a damp cloth.
3. Titan is very fragile, but it warms up to high levels. Mostly used by professionals. There is a danger of burn curls, if not possess sufficient skills and speed.
4. Teflon - “indifferent” to the means of styling, but slipping through the hair is not the best. Suitable for soft and thin hair. But the coating is short-lived and quickly erased.
5. Tourmaline - the material allows the use of any means for laying and not to be afraid of slipping. Negative ions occur when heated, so the hair scales close and retain moisture. Pretty expensive models. But the SUPRA HSS-1220 variant is quite affordable in price (tourmaline material + ceramics).
6. Marble - paired with ceramics can achieve the “wow effect”: cooling after exposure to high temperatures. For curls - the negative impact tends to zero.
7. Jadeite - models can be applied even on wet hair. Semi-precious mineral gives shine and ideally slides on the curls.
8. Silver - hair not only does not suffer, but also heals. Suitable for young ladies with very dry, brittle hair or owners of loose and dry on the nature of the hair.
9. Tungsten is one of the most expensive materials. The plates are heated instantly and evenly. Even without the use of additional tools, the hairstyle will last up to several days. Ideal for those who do not want to spend every morning on styling and pour on the liter of hair cosmetics.
What is the conclusion? We need to wonder what material plates to choose, so as not to spoil the hair! And here the economical option, presumably, would mean the death of hair. Or rather their overdrying, breakage and loss of vitality. Therefore, it is better to buy a decent iron once, than to spend money on hair restoration. We advise you not to spend money on a rectifier with metal plates, and Teflon is not a favorite. For the price and less disastrous effects on the hair leads ceramics.
Plate shape and width: proportions ratios
They learned more about health and safety curls, but have not yet figured out what other factors are important. So, to your attention the second point: the shape and width of the plates. Logically - two options are common:
- Narrow (size varies from 1.5 to 3 cm).
- Wide (wider than three centimeters).
The golden rule: the more magnificent the braids, the wider you need to choose a plate. The owner of a short bean or pixie and even thin hair - your version is the one that already. But this is too generalized information, let's clarify a little:
- plates up to two and a half centimeters will suit girls with the shortest haircuts or not lush hair to the shoulders,
- curls to medium-sized shoulder blades - ideally 2.5-3 cm (we advise you to look at the Rowenta SF1512F0 hair straightener),
- the same length, but the hair is thick, fluffy and heavy - we increase the width to 4 cm,
- for voluminous hair and long braids, plates of 7-8 centimeters are considered suitable (wide plates will delight the Panasonic EH-HS41-K865).
The logic is simple, but there are clarifications: narrow plates are still more functional. With their help, align the bangs or pass through individual strands. They are also more often used in practice by professional masters. But you can afford and quite a budget model - Mirta HS5125Y.
Life hacking: the device with narrow plates allows you to make small curls. Although large curls fit and wideplate iron. But this is another aspect - the shape of the plates.
If in your plans to use the iron not only as a rectifier, but also as a forceps, then look at the shape of the plates. One option: with rounded corners or straight. In the first case, the model is clearly suitable for the future creation of curls. With the same straight hair style variations less.
But the decision is always for the buyer: you plan to walk only with a straight hairdo - your plate shape is straight, you want to easily twist the ends or put a soft wave into your hair - take a closer look at the devices, the corners of which are slightly rounded. Not that there is a dispute which hair straightener is better, all this is just personal preference.
Type of mounting plates: hold tight
The third point in our advice material is the type of fastening of the canvases, and what it affects. Again: we do not criticize and do not say - some device is worse. Consider any differences between the models of rectifiers as a feature of this or that device.
With mounting everything is simple, there is:
- floating option
- rigidly fixed canvases.
More type of attachment affects ease of use. That is, in this case it is not even about the harm to the hair or the possibility of their different styling. There is only a concern for convenience.
Cloths that are attached to the body stably (even embedded) are regulated exclusively by physical effort. You make more effort when compressing the handles - the plates are closer to the treated area. So your hair will align with Gorenje HS110PR. Models with fixed canvases in our online store a lot.
Floating plates are not built into the body, they are fixed with rubber bands / springs. Moving along strands they fall and rise, it is not worth making special efforts. They are much more convenient to use, but the models are not so common. Stumble upon an iron with floating canvases, then take it - the choice is excellent. Sencor SHI131GD has a nice price.
Naturally, it is technologically easier for manufacturers to manufacture embedded plates immediately. But because of its convenience in use, the device with a floating type of mounting plates to the body is much more attractive in the eyes of young ladies. Just imagine how much time is spent on laying and leveling lush strands. And if at the same time it is still necessary and constantly make physical efforts (to press the pens on the iron), then the hands go numb in less than 10 minutes.
The gap between the plates: the convenience and beauty in detail
Such an element as the gap between the plates, which we placed on the 4th position, has its role and influence. You might think that such a trifle of “weather does not”, but still ...
Here we can safely advise which hair straightener will work better. And first of all it concerns the respect for the hair. We specify: the distance that appears during the compression of the cloths is the gap. When the plates are tight to each other, then about any gap we are not talking.
The gap affects the quality of hair straightening. Strands that fall into the gap are heated and straightened unevenly. To improve the result, the strand will need to be re-heat treated, which does not always have a positive effect on the hair structure. Therefore, remember: the presence of a gap - the load for the curls. Plus, you spend more time on the same action.
If you press the plate tightly, then the hair over the entire length is heated equally. Therefore, a reasonable choice is a flat iron without a gap, for example, BRAUN Satin Hair 7 ES3. But there are models where the distance between the plates does not exceed the norm. Look closely at the gap (its size) and the type of fastening the canvases. The distance less than 1 mm is not terrible for irons with rigidly fixed plates, and for floating webs a gap of 2 mm is acceptable. Although the second models, with a strong pressing of the handles, the gap almost always disappears. As an example, a great option rectifier Bosch PHS5263.
Thermostat and maximum temperature
Our 5th point of the program “correctly choose a hair iron” refers to the heating process, because of which the hair is transformed. Small curls, large waves, fluffy balls of hair - all this can be turned into smooth to shine and straight strands.Our assistant - high temperatures, but here it is necessary to include caution so as not to overdry the hair.
Remember - there are no people with identical hair. But for convenience, hair with a similar texture, classified by type. So much easier to determine the care and use of funds or equipment. Usually, girls complain about their hair. Someone toils with thin, devoid of volume and fat, but someone got dry, thick and brittle. And still others do not know what to do with a shock of fluffy hair like a dandelion. For all types of hair there are rules for using irons and recommended temperature regimes.
Useful advice: when buying, give preference to technology, which has several temperature regimes. A good example is the Rowenta SF7460F0 with 4 modes.
The most important thing in the thermostat is it to be! Of course, the choice is wide and many models are not equipped with this useful feature. And you can use irons without a thermostat, but it is better to pay a little extra and use the technique that you can control.
- Mechanical thermostat
- Electronic thermostat
Comfort and accuracy differ depending on the type chosen. It is impossible to set exact indicators on the mechanics, there is an option between: from 140 ° C to 150 ° C. Electronics with precise numbers are more friendly (we set it down to the degree). But, in most models, the indicator needs to be updated after shutdown. Accordingly, irons with a mechanical thermostat are cheaper, with an electronic - more expensive.
On pro-models and some household rectifiers have cheat sheets. A caring maker indicates for which hair type the selected treatment will work.
Plate heating range: up to 100-230 ° С. Taking into account the characteristics of the hair, you need to select the appropriate temperature:
- Thin, damaged and split injury is undesirable. Therefore, the thermostat is advised to keep the figure not higher than 150 degrees.
- For normal (you can even dyed, provided that they are tough) and thick curls - not higher than 180 ° C. Perfectly suited Philips HP8323 / 00.
- Mistresses unpainted, hard, curly and poorly amenable to hair styling allowed to set the indicator 200 degrees. In this case, you can even do without the thermostat, because the maximum will be constantly set. Take a closer look at Philips BHS674 / 00.
Geographically, the temperature controller is located on the handle of the device. If this is a mechanical option, then there is usually a multi-level switch. If there is electronics, then this is a small panel. Without a regulator, the device will operate at the maximum temperature, which will result in overdrying and injury to the strands.
Traditionally, the level at the minimum heating is 100 ° С, with the maximum mark everything is much more diverse - 150 ° С, 180 ° С, 200 ° С, 230 ° С.
Maxi degree affects how well strands will smooth out and how soon this will happen. For thick and curly hair, the effect of low heat will be insufficient. But the weakened locks fit the minimum degrees. The mechanism is clear: thicker hair - more heat. Therefore, ladies with thick hair are better to buy irons, which can warm up to 200-230 ° C.
There is also such a moment as the heating time to the maximum temperature. Techniques from the pros category spend 5 to 10 seconds on this process, household ones - a little less or exactly a minute. 40 seconds time limit, which will allow the plates, for example, Panasonic EH-HV10-K865, to warm up to combat readiness. If the iron reaches the desired degree for more than 3 minutes, think about it - are you ready to wait? After all, I want to start laying immediately, and time is always running out.
The heating period is related to the power of the device, but starting from the power indicator it is impossible to calculate the exact time.
Types of nozzles: new images every day
The final 6th item. When we choose a good iron, then additional tips are a fat plus in favor of a certain model. In total there are 2 types of nozzles:
The addition of an iron (talking about a removable comb that clings to one of the plates. The area of not tangled hair is better heat-treated).
Ironing replacement (sometimes devices are called multi-styling. Babyliss MS21E is a great example):
- curling tongs,
- “Flute” (special wavy nozzle),
- spiral nozzle
- brush head.
Let's stop on a removable element. The hairbrush unravels the braids before passing the heated plates. It allows you to reduce the thermal effect to the normal level, when it is not necessary to go through several times to remove small waves.
Additional tips are always an opportunity to experiment more, but professional devices are more often equipped with only one set of plates. But for home irons choice wider, apparently, to attract buyers.
Another difference professional and domestic rectifiers. Masters in the salon should have more space, so the length of the cord to about 3 meters. At home, this size seems inappropriate. But! The important point - choose an iron with a rotating base for the wire, so it will last longer. A worthy example is the BRAUN ST780.
We also recommend to look at additional features. The following are considered attractive:
- temperature memory (last installed and often chosen),
- cold air blows the hair out
- hot steam as a humidifier
- special loop for hanging,
- options for different baits
- movable cord anchorage, etc.
Alt: Chose the iron
We have dealt with many facts and now it is clear how to buy a good hair straightener. Do not forget about the most important qualities: a sparing material for the plates, a thermostat or several temperature regimes, a sufficient gap between the plates. And before buying, we recommend to watch a video with a selection of tips from the master on the choice of an iron:
